HAINER STEEL INDUSTRIAL CO.,LTD
WENZHOU HAINER STEEL TECH. CO.,LTD
Products:ASTM,JIS,BS,SMLS Pipe/Tube,Flange,Valve,Fittings (Elbow,Tee,Reduce),Sheets,Rod,Wire...
Materials: 304/L/H,310S,316L/Ti,317L,321,347H,2205,2507,904L,17-4PH,17-7PH,Monel 400,Inconel 600,625,800,825..
Product Details:
Payment & Shipping Terms:
|
| Standard: | ASTM,AISI,JIS,DIN,EN,GB | Quality Control: | Mill Test Certificate |
|---|---|---|---|
| Thickness: | Cold Rolled: 0.3-6.0 Mm Hot Rolled: 4.0-30mm | Width: | 1000mm,1219mm(4feet),1250mm,1500mm,1524mm(5feet),1800mm,2200mm Or As Required |
| Length: | 2000mm,2440mm(8feet),2500mm,3000mm,3048mm(10feet),5800mm, 6000mm Or As Required | Material: | 304, 304L, 316L, 321, 310S, 410, 410S, 420, 420J1, 430 |
| High Light: | 316 stainless steel plate,4x8 stainless steel sheet |
||
316L Cold Finished & Hot Finished, Stainless Steel Sheets for Building Construction ASTM A240
Quick Detail:
Produce standard: ASTM A240, A167, A176, A666, A693, A895 etc.
Material: SUS310S,316,316L,321,304,309S,202,201,420J2,430 etc.
Thickness: 0.3mm-30mm
Width: 1000mm-3000mm
Finish For Sheet: 2B,BA, No.3,No.4,Mirror finish,Hairline finish No.1 etc.
Technique:Hot Rolled And Cold Rolled
Description:
Thickness: Cold Rolled: 0.3-6.0 mm Hot Rolled: 4.0-30mm
Width: 1000mm,1219mm(4feet),1250mm,1500mm,1524mm(5feet),1800mm,2200mm or as required
Length: 2000mm,2440mm(8feet),2500mm,3000mm,3048mm(10feet),5800mm, 6000mm or as required
Material: 304, 304L, 316L, 321, 310S, 410, 410S, 420, 420J1, 430
Surface finish: NO. 1, 2B, BA, NO. 4, HL, 8k mirror or As Required
Quality control:Mill Test Certificate Is Supplied With Shipment, Third Part Inspection Is Acceptable
Marking: Registered logo,Heat Number,Steel Grade,Standard,Size
Applications:
We,this material stainless steel plates be widely used in kinds of industries:
1: Construction feild,shipping building industry
2: Petroleum and Chemical Industries
3: Food and Machenical Industries
4: Boiler Heat Exchange
5: Machinery and Hardware Industries
THE CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
|
Grade |
C (Max) |
Mn (Max) |
P (Max) |
S (Max) |
Si (Max) |
Cr |
Ni |
Mo |
|
201 |
0.15 |
5.50-7.50 |
0.06 |
0.03 |
1 |
16.00-18.00 |
3.50-5.50 |
- |
|
202 |
0.15 |
7.50-10.00 |
0.06 |
0.03 |
1 |
17.00-19.00 |
4.00-6.00 |
- |
|
301 |
0.15 |
2 |
0.045 |
0.03 |
1 |
16.00 - 18.00 |
6.00 - 8.00 |
- |
|
304 |
0.08 |
2 |
0.045 |
0.03 |
1 |
18.00 - 20.00 |
8.00- 10.50 |
- |
|
304L |
0.03 |
2 |
0.045 |
0.03 |
1 |
18.00 - 20.00 |
8.00- 12.00 |
- |
|
310S |
0.08 |
2 |
0.045 |
0.03 |
1.5 |
24.00- 26.00 |
19.00-22.00 |
- |
|
316 |
0.08 |
2 |
0.045 |
0.03 |
1 |
16.00 - 18.00 |
10.00- 14.00 |
2.00 - 3.00 |
|
316L |
0.03 |
2 |
0.045 |
0.03 |
1 |
16.00 - 18.00 |
10.00- 14.00 |
2.00 - 3.00 |
|
316Ti |
0.08 |
2 |
0.045 |
0.03 |
1 |
16.00 - 18.00 |
10.00- 14.00 |
2.00 - 3.00 |
|
317 |
0.08 |
2 |
0.045 |
0.03 |
0.75 |
18.00 - 20.00 |
11.00 - 14.00 |
3.00 - 4.00 |
|
317L |
0.03 |
2 |
0.045 |
0.03 |
0.75 |
18.00 - 20.00 |
11.00 - 15.00 |
3.00 - 4.00 |
|
321 |
0.08 |
2 |
0.045 |
0.03 |
0.75 |
17.00 - 19.00 |
9.00 - 12.00 |
- |
Surface Finish Introduction
2B:Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.Application in Medical equipment, Food industry, Construction material, Kitchen utensils.
BA:Those processed with bright heat treatment after cold rolling.Application in Kitchen utensils, Electric equipment, Building construction.
NO.3:Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.Application in Kitchen utensils, Building construction.
NO.4:Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.Application in Kitchen utensils, Building construction, Medical equipment.
HL:Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.Application in Building Construction.
NO.1:The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.Application in Chemical tank, pipe
